Loading Auctions
This auction has passed.

Location:  Phelps County Fairgrounds, Holdrege, NE

Date : Tuesday – April 1, 2014

Time: 10:00 AM

Click Here to View Sale Bill

See our results by clicking the link below:


Call Adam today (308) 440-1923 to have your equipment listed

We are now setting up at the fairgrounds. Items accepted up until March 31st.

Reasons to sell on our Equipment Auction

1. Highly visited website.
2. We market this auction across the Midwest.
3. We use internet bidding on Proxibid with many buyers.
4. We sell equipment Absolutely to the highest bidder, with no reserves.
5. We have experienced loader drivers to load and unload equipment.
6. We pay sellers usually within 2 weeks or less.
7. Good commission rates.
8. Centralized location for pre-auction inspection at the Phelps County Fairgrounds in Holdrege, NE.
9. Everyone is treated fairly.

Recent Additions

2014 Circle M goose neck trailer, 30 ft., tandem duals, dovetails, flex control, 12,000 lb axles, sharp, VIN:1C9GS30023DA634098
2012 JD 612C corn head, 12R36″ only 2,600 acres, Contour Master, hyd. deck plate, snapper rolls, knife rolls, kept inside, been well maintained, sharp, SN/1XF0612C9X000036
2012 J&M 1050 bu. grain cart, walking tandems, hydr. spout, side and rear camera, monitor, 18.4R42, 480/80R42, SN/ 2021, corner aug., setup for 36” rows, tarp
JD 480-80R42 combine duals, used 2 years, like new, spacers for 670 & 9770 series combines, ladder ext., axle rods
Mayrath 10×71′ auger, hyd. lift, w/ low profile swing hopper, like new, barely used, sharp
1976 Chevy C65 straight truck, twin screw, 20ft. box & hoist, 427 gas eng. overhauled 5,000 miles ago, 13 spd., sticks sometimes coming out of 4th gear
1530′ alum. pipe, 8″, 20″ gates
250′ plastic 10″ pipe, 30″ gates
960′ plastic 8″ pipe, 30″ gates
4 Valley pivot tires
2000 Ford F-350 pickup, 7.3L diesel, auto, 2×4, dually, 200,600 miles, runs good, salvage title, vin:1FTWX32F6YEC16149
500 gal. fuel trailer, new hose & filter, nice unit
10 ft. single axle steel trailer
20 ft Lo-boy bumper hitch trailer, wooden planks
250 bu. side dump wagon
Koyker loader & grapple, brackets, came off of M&M M5
JD 7100 MaxEmerge 12R36 planter, openers, monitor, Orth. bar
Hawkins Hiller 12R36, folding bar
Saddle Tanks
Small blade
Pickup box trailer
Farmall B reversed tractor, loader & forks, runs, duals
IH B tractor, doesn’t run, not stuck, SN 104560
Steel gates
Case 646 utility tractor, loader w/ bucket, joystick, rear blade, tire chains, starts and runs well, sharp

Trailer items from 1 consignor

2 large Mineral Feeders, one never used
Milwaukee Sawzall electric, new in box
Makita cut off saw, new in box
Makita sander-grinder, new in box
Makita 1/2 inch drill, new in box
DeWalt angle grinder, new in box
Craftsman circular saw, new in box
KT welding and cutting oxy outfit – new in box
Delevan cast iron turbo 90 pump, new in box
Milwaukee impact wrench
6 & 12 battery load tester in box
Soil compaction tester
Grease guns
Log chains
Frost bars
Miter Box
Bearing Pullers
US Motors gearhead


Gerald Rademaker – 308-991-1886

1977 Ford F700 Custom Cab, 18ft. steel box, Shurlock roll tarp, 4&2 spd., good rubber, tag axle, clean cab, needs a tune up, 68K miles, overhauled at 62K extra sharp
Int. Farmall M tractor, kept inside, good paint, good rubber, hasn’t ran in several years
Red Devil 8ft. snow blower, 3pt.
Int. sickle mower
Pickup box trailer
M&M one-way
JD 6 bottom plow
NH 268 square baler


Ford 8600 w/ Du-Al 3100 loader/grapple, runs & starts well, cab, shows 4,147 hrs., 3 pt. quick hitch, 540 pto, 2WD, 2 hyd., good Agri-Power 18.4-38 tires, tire chains included, frt. wts. & bracket,tractor SN 0511547, loader SN 5904, Gary Arehart 308-991-5094

Hawkins Manufacturing

DoAll C-916 Horizontal Band Saw Job Selector, 6 new blades included, air assist, wet saw, has side table, great shape, everything works, 230V, 3 phase, SN 501-94712, see a video of it running at  https://www.youtube.com/watch?v=6EG3dM264yQ
8 bolt rims, bolts to 888 hub
6 bolt rims
5 bolt rims
16 Hubs & spindels kits -includes dust cap, seal, bearing, lag pin, nuts and cotter pin. To be sold in pairs.

Farm Equipment

12R36 Hawkins hiller, 3 pt., folding bar
Schaben 42ft. 3pt. sprayer, hydr. booms, w/ PTO rotary pump, been kept inside, low use & in excellent condition
Westfield 10×71′ auger w/ hopper

Vehicles & Trailers

1998 S-10 pickup, runs good, rear main leaks, 4 cyl.
WW horse trailer, good floor, near new tires, no title
New 35ft. header trailer
New 30ft. header trailer
2 wheel flat bed trailer

Unused Skid Steer Attachments

Lowe Hyd Auger 1650ch w/ 12in & 18in w/ skid steer quick attach
Lowe Hyd Auger 750ch w/ 9in & 12in w/ skid steer quick attach
Lowe Hyd Auger 750ch w/ 9in & 12in & 15 in w/ skid steer quick attach
Stout Brush Grapple HDU72 w/ skid steer quick attach
Stout Rock Bucket Grapple HD72 w/ skid steer quick attach
Stout Hitch Receiver Plate
Stout Grapple Attachment Add-on
Stout Regular Weld-on Skid Steer Plate
Stout Solid Weld-on Skid Steer Plate
Stout Walk-Through Pallet Forks 48 in. w/ skid steer quick attach
Stout Full-Back Pallet Forks 48 in. w/ skid steer quick attach
Pallet Forks 48 in. w/ skid steer quick attach
Stout Bale Spear-round w/ skid steer quick attach


Krause 34ft. field cult., 9″ shovels
Krause 21ft. disc, near new tires
Vassar 10ft. disc, 3 pt., near new


75hp motor
1200′ 8″ plastic pipe, 20″ spacing
Pipe trailer, double hitch


80 – 20ft. continuous fence panels, 6 bar w/ brackets, new
40 – 12’x5′ portable corral panels, new
12×24 ft. calf shed, 5 inch skids, nice tin, tie down brackets
New Silage Wagon with feed saver
New Silage Wagon
WW Chute w/ Powder River head catch
Small head catch


300 gal. fuel tank & pump on cart
JD 8 ft. blade, 3pt.
JD grain drill
3pt. post hole digger
Pair of row huggers
Bushhog 268 shredder, gear boxes are good
New 10′ box blade
New 12′ box blade
10 frt. end weights for JD 8000 series
Gnuse hydr. 3rd link for JD 8000 series
Power hacksaw
JD quick hitch
8 Sunco row openers


Chambers lister

Terms: Cash or good check with state issued ID. Must register for a buyer’s number to bid. No items can be removed until settled for. Not responsible for accidents. Everything sells in as-is condition, no warranties. All items must be removed by April 8th. Anything left after April 8th is charged a $50 rental fee per day to be paid to the Phelps County Fairgrounds. No loaders after April 8th. There is a $20 title transfer fee for titled items. Announcements made the day of the auction take precedence over prior advertising.

Lunch served by Reds Country Catering


April 1, 2014
10:00 am - 5:00 pm
Auctions Categories:
, ,


Adam Marshall


Phelps County Fairgrounds
1308 2nd St
Holdrege, NE 68949 United States
Google Map